Easily check your error code

LG · Dishwasher

LG Dishwasher OE Error Code: Not Draining — Causes & Fixes

Also shown as: Water Outlet Error

OE

OE means your LG dishwasher could not drain the water out of the tub. Most of the time it is a clogged filter, a kinked drain hose under the sink, or a blocked air gap or garbage-disposal connection — all DIY-friendly.

Easy⏱ 15–45 minUpdated 2026-11-18

What OE means

LG calls OE a 'water outlet error': after a wash phase, water was still in the tub when the dishwasher expected it to be gone. LG says it most often comes from food clogs or an installation problem with the drain hose.

Likely causes (most → least common)

  1. Clogged filter or food debris in the sumpMost common

    Food residue and small objects collect in the mesh filter at the bottom of the tub.

  2. Kinked or crushed drain hoseCommon

    Items stored under the sink can press on the drain hose (usually white or grey, corrugated).

  3. Blocked air gap or garbage-disposal inletCommon

    Debris in the sink-top air gap, or a clogged disposal, stops water leaving.

  4. Knockout plug not removed (new install)Common on new installs

    If OE appears on the very first cycle after a new dishwasher or new disposal, the disposal's knockout plug may still be in place.

  5. Drain hose installed out of specOccasional

    LG specifies a maximum hose length of 12 ft (3.6 m), no extensions, and the hose end 12–40 inches above the floor.

  6. Frozen drain hoseRare

    Possible in unheated spaces.

  7. Failed drain pumpRare

    If filter, hose and air gap are clear and OE returns, a part may be faulty.

How to fix it, step by step

  1. Turn off the dishwasher and remove debris

    Switch the unit off, pull out the lower rack and remove visible food or objects from the bottom of the tub.

    Easy⏱ 5 min🔧 Gloves
  2. Clean the filter

    Twist the mesh filter counter-clockwise to remove it, scrub it under running water with a soft brush, then refit and turn clockwise until it clicks. Watch for sharp edges on stainless filters.

    Easy⏱ 10 min🔧 Soft brush
  3. Straighten the drain hose

    Open the cabinet under the sink, move stored items away from the drain hose and straighten any kinks.

    Easy⏱ 5 min🔧 Flashlight
  4. Clean the air gap

    If your sink has an air gap, lift off the cover and cap and clear debris with a toothpick or small brush. LG suggests flushing it with hot water using a turkey baster.

    Easy⏱ 5 min🔧 Toothpick or small brush, Turkey baster
  5. Force a drain and test

    Use your model's CANCEL & DRAIN button combination if it has one. Otherwise start a cycle, let it run about 45 seconds (the first part of every cycle is drain-only) and switch off. Then run an empty Normal or Heavy cycle to test.

    Easy⏱ 5–60 min🔧 No tools
  6. New install? Check the knockout plug

    If OE appeared on the first cycle after installing a new dishwasher or disposal, the disposal knockout plug probably needs removing — a job for the installer or a plumber.

    Moderate⏱ 15 min🔧 Screwdriver, Hammer (installer task)

When to call a professional

  • OE keeps returning after the filter, drain hose and air gap have been cleaned and checked.
  • You hear the drain pump humming but no water leaves (possible pump failure or blockage inside the sump).
  • Water is leaking onto the floor or into the cabinet.

Parts that may be involved

Always match the part to your exact model number (rating label) before ordering.

Drain pump (model-specific)

Replaces a pump that no longer moves water out of the tub.

Fit: Match your exact model number (label on the edge of the door or tub).

No price shown — prices are only listed when verified on a retailer page.

Filter assembly

Replace a cracked or deformed filter that lets debris into the pump.

Fit: Model-specific.

No price shown — prices are only listed when verified on a retailer page.

Drain hose

Replace a cracked or permanently kinked hose.

Fit: Do not extend beyond LG's 12 ft maximum.

No price shown — prices are only listed when verified on a retailer page.

Related codes

Same problem on other brands

All LG dishwasher error codes · Every code A–Z

FAQ

Can I run my LG dishwasher with an OE error?

It will keep stopping until the drain problem is cleared. Clean the filter and check the hose first, then run an empty cycle to confirm it drains.

Why did OE appear on a brand-new LG dishwasher?

LG says OE on the first cycle usually means an installation issue: a kinked, too-long or too-high drain hose, or a disposal knockout plug that was not removed.

How often should I clean the filter?

LG's own guidance for some models is weekly or every two weeks; regular cleaning prevents OE and odours.

Sources

This guide paraphrases the manufacturer's own support documentation. We re-check sources regularly.