LG · Washer
LG Washer LE Error Code: Motor Locked — Causes & Fixes
Also shown as: LE1, Motor Locked Error
LE means the motor could not turn the drum properly. Often it is simply an overloaded drum, a motor that needs to cool after back-to-back cycles, or a coin stuck between drum and tub. Start with a 5-minute power reset.
What LE means
LG uses LE (and LE1 on some top-loaders) for a 'motor locked' condition: the tub is not spinning as expected because the motor is strained, temporarily protected, or physically blocked.
Likely causes (most → least common)
- Overloaded drum / bulky beddingMost common
Too much laundry strains the motor. Use the Bedding cycle for comforters.
- Motor overheated after back-to-back cyclesCommon
LG advises waiting 30–60 minutes between consecutive cycles so the motor can cool.
- Temporary electronic errorCommon
A 5-minute unplug can clear a temporary communication glitch.
- Coin or object caught around the tubOccasional
A coin, bra wire or similar wedged between drum and tub (or washplate on top-loaders) can block rotation.
- Motor, rotor-position (hall) sensor or wiring faultRare
If none of the above helps, the motor or its sensor/wiring needs a technician's diagnosis.
How to fix it, step by step
Unplug for 5 minutes
Unplug the washer, wait five minutes, plug it back in and restart the cycle.
Reduce the load
Remove some items, or switch to the Bedding cycle for a large comforter.
Let the motor cool
If you ran several cycles in a row, leave the washer off for 30–60 minutes before trying again.
Check for trapped objects
With the power off and the drum empty, look into the gaps around the drum (and under the washplate edge on top-loaders) for coins or other items and remove them with pliers or tweezers. Turn the empty drum by hand — it should rotate freely.
When to call a professional
- LE persists after a reset, a lighter load, a cool-down and an object check.
- The empty drum is hard to turn by hand, grinds or makes metallic noises.
- You smell burning or see scorched wiring.
Parts that may be involved
Always match the part to your exact model number (rating label) before ordering.
Rotor position (hall) sensor (model-specific)
A failed sensor on direct-drive LG motors can cause LE codes.
Fit: Diagnose before buying; match model number.
No price shown — prices are only listed when verified on a retailer page.
Stator / drive motor assembly
Replaces a failed motor winding — usually a technician job.
Fit: Model-specific, heavy part.
No price shown — prices are only listed when verified on a retailer page.
Motor wiring harness
Damaged or loose harness connectors can mimic a motor fault.
Fit: Model-specific.
No price shown — prices are only listed when verified on a retailer page.
Related codes
More LG washer codes
Same problem on other brands
FAQ
How do I reset an LG washer LE error?
Unplug it for five minutes and plug it back in. If it ran several cycles in a row, wait 30–60 minutes first so the motor can cool.
Is LE the same on top-load and front-load LG washers?
Both use LE for a motor-locked condition; some top-loaders also show LE1, and AE when the gear that drives the tub is not working properly.
Does LE mean the motor is broken?
Not necessarily. LG lists overloading, overheating and trapped objects as common, harmless causes. Only if the code persists after those checks is a technician needed.
Sources
This guide paraphrases the manufacturer's own support documentation. We re-check sources regularly.
- If Your Front Load Washer Has a Motor Error and Shows an LE Error Code — LG USA Support (last checked 2026-11-18)
- LG top load washing machine – Why is an AE, LE, or LE1 error code being displayed? — LG USA Support (last checked 2026-11-18)
- LG Washing Machine Troubleshooting (Common Error Messages) — LG UK (last checked 2026-11-18)