Bosch · Dishwasher
Bosch Dishwasher E15 Error Code: Water in the Base (Leak Protection)
Also shown as: E:15, F15, E3100, Flashing tap / water-protection symbol
E15 means Bosch's leak-protection system found water in the base tray of the dishwasher. Turn off the water supply first. You can inspect hoses for visible damage, but Bosch advises against repairing the cause yourself if it isn't obvious.
What E15 means
A float switch in the base pan detected water. The leak-protection (AquaStop / water-protection) system activated and stopped the dishwasher from filling. Some newer models show E3100 instead. The water itself came from somewhere — the code tells you a leak happened, not where.
Likely causes (most → least common)
- Leaking or damaged hose / connectionMost common
Bosch suggests checking the base and hoses for visible kinks, damage or leaks.
- Water escaping inside the unit (seal, pump or valve area)Common
An internal leak drips into the base pan. Locating it requires removing panels — a technician task per Bosch.
- Faulty float switchRare
If the base is dry and E15 persists, the switch itself may be at fault — diagnose with a technician.
How to fix it, step by step
Turn off the water supply
Close the tap or valve that feeds the dishwasher. This is Bosch's first instruction for E15.
Switch the dishwasher off at its button
Use the on/off button. Bosch Switzerland notes that AquaStop needs power to protect against flooding, so they advise not to unplug it while it is in this state — follow your manual.
Look for visible leaks and damaged hoses
Check the floor around the base and, where accessible (under the sink), the inlet and drain hoses for kinks, cracks or loose connections.
Replace an obviously damaged hose — or book service
If a hose is visibly damaged, Bosch recommends ordering the genuine replacement part. If no cause is visible or the error persists, Bosch advises against self-repair and recommends booking a repair.
When to call a professional
- No visible leak or damaged hose — the water came from inside the unit.
- E15 returns after a hose was replaced.
- Water has reached flooring, cabinets or electrical outlets.
Parts that may be involved
Always match the part to your exact model number (rating label) before ordering.
AquaStop inlet hose (model-specific)
Replaces a damaged AquaStop / inlet hose — Bosch explicitly mentions ordering replacements for visibly damaged hoses.
Fit: Use the model's E-Nr. (on the door edge) to match.
No price shown — prices are only listed when verified on a retailer page.
Drain hose
Replace a cracked or leaking drain hose.
Fit: Model-specific.
No price shown — prices are only listed when verified on a retailer page.
Float switch / leak sensor
Only if a technician confirms a faulty switch.
Fit: Model-specific; diagnose first.
No price shown — prices are only listed when verified on a retailer page.
Related codes
More Bosch dishwasher codes
Same problem on other brands
FAQ
Can I reset a Bosch E15 error myself?
The code clears once the base pan is dry and the cause is fixed. Bosch's guidance is to turn off the water, check for visible hose damage, and book a repair if the cause is not visible — rather than forcing a reset.
Is E3100 the same as E15?
Yes. Bosch lists E3100 with the same meaning — water detected in the base, leak protection activated.
Should I unplug the dishwasher?
Bosch Switzerland advises switching it off at the button but not unplugging it, because the AquaStop system needs power to keep protecting against water damage. Check your manual.
Sources
This guide paraphrases the manufacturer's own support documentation. We re-check sources regularly.
- E15 Bosch Dishwasher Error Code — Bosch Home US (last checked 2026-11-18)
- E15 or E3100 — Bosch Home Singapore (last checked 2026-11-18)
- Dishwasher Error Codes (US) — Bosch Home US (last checked 2026-11-18)
- Geschirrspüler-Fehlercode E15 (German) — Bosch Home Switzerland (last checked 2026-11-18)